Unsolved
1 Rookie
•
19 Posts
0
2890
After add disk, how to config the non allocated space to Tier 1 Storage?
After add disk, how to config the non allocated space to Tier 1 Storage?
I am concern about the fully storage, so i add a new disk, but i don't know how to fix the 100%.
please help.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 19th, 2020 16:00
Hello Fung20200619,
Here is the link to the administrator guide and if you look on page 263, it explains how to manage unassigned disks. https://dell.to/3fFCW4N
Please let us know if you have any other questions.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
June 19th, 2020 17:00
What does it show after it completed?
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 19th, 2020 17:00
I am not sure is it the right way to rebalance, because i see the page i show those a day.
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 19th, 2020 19:00
I never see the percent %100, but i think it has been a while of rebalance. about a week.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 22nd, 2020 13:00
Hello Fung20200619,
Do you have secure console enabled on your SC? If you do, I am sending you a private message and if you can send me your controller serial# so that I can look at your system. Here is the link on how to enable secure console if you need it. https://dell.to/3fMFrSX
Please let us know if you have any other questions.
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 24th, 2020 22:00
i had place one more disk in, how should i do to free the Raid? Why i cannot modify Tier Redundancy?
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 24th, 2020 22:00
After i click send supportAssist, it show this message
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 24th, 2020 22:00
Also cannot restart sercure console
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 25th, 2020 11:00
Hello Fung20200619,
Which compellent system do you have? How many drives have you added in total?
Please let us know if you have any other questions.
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 25th, 2020 21:00
SCv2000,
12 drives
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 26th, 2020 12:00
Hello Fung20200619,
You added 12 drives? How many drives were in your system prior to adding drives to it?
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 26th, 2020 20:00
Sorry, before have 10drive. (1 spare)
after add 2 drive. like I upload the pics before.
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 29th, 2020 00:00
How can i set the redundant allocated space to 60.04TB? Because i had add 2 drive like the pic.
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
June 29th, 2020 11:00
Hello Fung20200619,
I want to make sure that you have done the following steps in this order.
Once the rebalances finishes then you should see the new space on the tier.
Fung20200619
1 Rookie
1 Rookie
•
19 Posts
0
June 29th, 2020 21:00
i think i had done all the step, but the Rebalance RAID progress very long time, i had wait that for 2 week, and it still show 99%
so, i stop it, and should me click ok shown in pic?