This post is more than 5 years old
614 Posts
0
749
Adding a 8 GB line card
Hello,
Slots 8/9 are currently empty on my MDS 9509's. I need to add an additional 8 GB line card. Can we do that as Non Disruptive FRU?
Many thanks in advance!
Admingirl
This post is more than 5 years old
614 Posts
0
749
Hello,
Slots 8/9 are currently empty on my MDS 9509's. I need to add an additional 8 GB line card. Can we do that as Non Disruptive FRU?
Many thanks in advance!
Admingirl
Top
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 7th, 2015 13:00
should be fine then, take switch backup, ground yourself to the switch itself and gently slide the blade inside . It will take a couple of minutes to boot up (it might need to be either upgraded or downgraded to match the current version on the switch ..it will happen automatically), whole process is non-disruptive process.
admingirl
614 Posts
0
April 7th, 2015 11:00
show module
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 24 1/2/4 Gbps FC Module DS-X9124 ok
2 24 1/2/4 Gbps FC Module DS-X9124 ok
3 24 1/2/4 Gbps FC Module DS-X9124 ok
4 24 1/2/4/8 Gbps FC Module DS-X9224-96K9 ok
5 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
6 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
7 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ --------------------------------------------------
1 5.2(6a) 1.7 20:01:00:0d:ec:a0:ba:c0 to 20:18:00:0d:ec:a0:ba:c0
2 5.2(6a) 1.7 20:41:00:0d:ec:a0:ba:c0 to 20:58:00:0d:ec:a0:ba:c0
3 5.2(6a) 1.7 20:81:00:0d:ec:a0:ba:c0 to 20:98:00:0d:ec:a0:ba:c0
4 5.2(6a) 1.6 20:c1:00:0d:ec:a0:ba:c0 to 20:d8:00:0d:ec:a0:ba:c0
5 5.2(6a) 1.6 --
6 5.2(6a) 1.6 --
7 5.2(6a) 1.4 21:81:00:0d:ec:a0:ba:c0 to 21:92:00:0d:ec:a0:ba:c0
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 00-13-80-a8-c9-78 to 00-13-80-a8-c9-7c
2 00-13-80-a8-ca-8c to 00-13-80-a8-ca-90
3 00-13-80-a8-c9-0c to 00-13-80-a8-c9-10
4 c8-4c-75-b1-28-54 to c8-4c-75-b1-28-58
5 00-19-e7-a8-4d-c8 to 00-19-e7-a8-4d-cc
6 00-19-e7-a8-4d-9c to 00-19-e7-a8-4d-a0
7 00-23-eb-4f-0d-20 to 00-23-eb-4f-0d-28
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 7th, 2015 11:00
please provide output from "show module" and "show hardware" (scramble serial numbers)
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 7th, 2015 11:00
is the new module the same model as in slot 4 ?
admingirl
614 Posts
0
April 7th, 2015 11:00
Thank you Dynamox, will do that now.
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
April 7th, 2015 13:00
no worries.
admingirl
614 Posts
0
April 7th, 2015 13:00
Yes it is.
admingirl
614 Posts
0
April 7th, 2015 13:00
Awesome!!! Thanks so much Dynamox!