This post is more than 5 years old
1 Message
0
1085
Brocade 200e - Switch Name
Can I change a switch name without affecting anything else?
Basically I have a small SAN, two Brocade 200e switches connected to a Clariion CX3-20. During installation the switches were configured, probably the default setting, with the same name "SW200E". Now I want to rename both to "SW200E_A" and "SW200E_B". I know where to do this in the web tools but I don't know if there are any consequences.
Thanks in advance for your input.
Bill
Basically I have a small SAN, two Brocade 200e switches connected to a Clariion CX3-20. During installation the switches were configured, probably the default setting, with the same name "SW200E". Now I want to rename both to "SW200E_A" and "SW200E_B". I know where to do this in the web tools but I don't know if there are any consequences.
Thanks in advance for your input.
Bill
RRR
2 Intern
2 Intern
•
5.7K Posts
0
December 5th, 2007 07:00
type switchname
that's it
Your fabric is set up using domain ids, not names.
RRR
2 Intern
2 Intern
•
5.7K Posts
0
December 5th, 2007 07:00