DELL|EMC Storage Forum
Posts
Unsolved
This post is more than 5 years old
chenchen
1 Rookie
1 Rookie
•
31 Posts
0
1791
January 24th, 2017 01:00
AX4-5 installation from scratch
Hi.
Is there any default ip address to start with?
Responses(2)
No Events found!
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
January 24th, 2017 13:00
Hello chenchen,
If you are direct connected to one of the controllers then the IP address should be 192.168.1.1/setup & that should bring up the basic setup page for your AX4-5.
Please let us know if you have any other questions.
chenchen
1 Rookie
1 Rookie
•
31 Posts
0
January 24th, 2017 23:00
thanks for the answer. I was trying this one. i gave my pc 192.168.1.2 (255.255.255.0) but 1.1 has no answer..
Is there any way to make an hard reset for the sp?