Unsolved
This post is more than 5 years old
5 Posts
0
1124
Dell MD3400 "controller is locked down"
Hello
In a MD3400 post change of disk show the following error
"controller is locked down due to detected corruption in the primary database..."
I run the VXShell command lemClearLockdown but the problem persist
My problem is the MD not have support ):
Is possible recovery the Storage?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
May 25th, 2018 12:00
Hello Santunez_Dell,
Did you replace all the drives in your MD3400 or did you just replace a single disk? If you changed all the drives in your MD3400 at once, did you delete all virtual disk and disk group information in MDSM? When replace multiple drives in an MD you need to remove the virtual disk and disk group information or un-initialize the unit then reinitialize the system with the new drive in it. Also, were the drives that you inserted dell drives with a Dell part# from the support matrix list on pages 19-25. Here is the link to the matrix. http://downloads.dell.com/manuals/common/powervault_md34xx_md38xxif_supportmatrix_en-us.pdf
Please let us know if you have any other questions.