Unsolved
24 Posts
0
2791
MD3200i Changing IP
I need to move our Dell MD3200i from our old flat legacy network to our new Storage VLAN.
I currently access the MD3200i via the PowerVault Madular Disk Storage Manager.
There are two RAID controller Modules on the unit (0 & 1).
1 has an IP of 172.20.20.10
2 has an IP of 172.20.20.11
Can I change one module IP at a time and test connectivity before changing the next IP?
Thank you
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
January 31st, 2019 07:00
Hello MikePatriot,
You can change you IP’s one at a time. If you are changing your iscsi IP’s as well, you may need to go through host mappings setup again if your host can’t connect to your VD’s on the new VLAN. Here is the link to the administrator guide just in case you need it. https://downloads.dell.com/manuals/common/md32xx_md36xx_administrator%20guide_en%20us.pdf
Please let us know if you have any other questions.
MikePatriot
24 Posts
0
February 1st, 2019 11:00
Thank you.
Is there a way to tag these ports to a certain VLAN?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
February 4th, 2019 05:00
Hello MikePatriot,
Vlan tagging is supported on an MD3200i.
Please let us know if you have any other questions.