Unsolved
2 Posts
0
4316
PowerVault MD3200 and MD1200 SAS Setup
Have 2 PowerEdge R710s suppose to be connected to a PowerVault MD3200 and 2 MD1200s. I can only get the servers to reconize the MD3200. The server were moved to a new location without proper documentation on how the were originally setup. Looking for help on how to connect the Fibre channels together to get access to the MD1200s?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 6th, 2019 06:00
Hello ThornManz,
Here is a link to our deployment guide for your MD3200, if you look on page 23 is shows you how you want to cable your MD1200 to your MD3200. https://downloads.dell.com/manuals/common/powervault-md3200i_deployment%20guide_en-us.pdf
Please let us know if you have any other questions.
ThornManz
2 Posts
0
March 8th, 2019 13:00
So it did not have any wiring setup instructions. do you have access to any of that?
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
March 11th, 2019 08:00
Hello ThornManz,
I don’t have any access to how your system was setup. You can use the deployment guide from the link that I posted in my previous post to connect your MD3200 & MD1200 to each other.
Please let us know if you have any other questions.