This post is more than 5 years old
24 Posts
0
14458
cx300 standby power failure
Our cx300 had an amber light, so we checked the navisphere software and its reporting a failure with the second standby power supply. Any ideas for first steps to checking this out/repairing this?
Thanks
Dev Mgr
9.3K Posts
1
June 1st, 2009 09:00
It generally means you need to replace the SPS.
You can disconnect everything from it and then just plug it into a different powersource and power it on to see if the amber lights persist. If they do, it's definitely time to replace it.
Dev Mgr
9.3K Posts
0
June 1st, 2009 07:00
Check the LEDs on the SPS. It should have 4 of them. Compare them to the other SPS to get an idea of what they should look like.
gbrot
24 Posts
0
June 1st, 2009 07:00
Indeed, the bottom two of the four led's are amber on the malfunctioning one. Does that mean anything in particular?