Unsolved
This post is more than 5 years old
1 Message
0
9850
Failed to close clone save session for ssid 168988641:
Hello,
We have two DD in our environment we are trying to clone the data from one DD to another DD but it is showing some error kindly help me to resolved the issue..
kindly find the error log..
libDDBoost version: major: 2, minor: 6, patch: 1, engineering: 1, build: 394260
80470:nsrclone: Following volumes are needed for cloning
80471:nsrclone: MINDDMPRDNOD1axisbcom.001 (DD)
100303:nsrclone: Cloning savesets from storage node 'mintsmprdapp4_bkp'
77398:nsrclone: DD Cloning started
77426:nsrclone: Cloning save sets from the volume MINDDMPRDNOD1axisbcom.001
32379:nsrclone: Cloning save set index:e4763fe8-00000004-52f36acf-52f494e6-000a5000-c904b556 (ssid/cloneid 168988641/1410502625)
75360:nsrclone: Cloning of size 7874 KB is in progress...
72985:nsrclone: Source volume 'MINDDMPRDNOD1axisbcom.001' ready for cloning
72986:nsrclone: Destination volume 'minclnprdbin.001' ready for cloning
85360:nsrclone: Failed to obtain filecopy status for ssid=168988641, cloned 0 bytes out of 8062876: Retrieving the status of a file copy operation failed ([5009] I/O error).
85358:nsrclone: Failed to close clone save session for ssid 168988641: Save session with saveset id f27f0e9c-00000006-0a128fe1-54128fe1-05fb5000-c904b556 terminated
75712:nsrclone: Cloning failed for save set : index:e4763fe8-00000004-52f36acf-52f494e6-000a5000-c904b556 (ssid 168988641)
77276:nsrclone: Total size cloned so far: 0 KB.
MM_CLONEEND w/active saves67790:nsrclone: Total size cloned: 0 KB.
77275:nsrclone: DD cloning failed
79625:nsrclone: Failed to clone any DD save sets
Proxy clone failed to clone all or few savesetsSome of the clones failed
Some of the clones failed
ble1
2 Intern
2 Intern
•
14.3K Posts
0
September 11th, 2014 23:00
Can these two DD communicate among each other (assuming you use DD Boost)?
Also, you should move this question to NetWorker or Data Domain forum - this area here is general ECN help.
Jeffey1
2 Intern
2 Intern
•
2.8K Posts
0
October 21st, 2014 02:00
Hi
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Data Domain Support Forum" which would be the most relevant for this question.
AlanZ1
790 Posts
0
October 27th, 2014 10:00
Your question has been moved into a product community where it has a better chance of being seen by the correct audience.
Ruda1
1 Message
0
February 17th, 2015 07:00
Hi,
I was facing the same problem and in the end the problem was with DNS resolution. DDs weren't able to translate their own hostnames. Creating proper DNS records solved my problem.
shirbhap
1 Message
0
April 20th, 2015 08:00
Hi Rudolf,
Yes, you are right. problem with DNS resolution. I was also facing the same issue and resolved by adding host entries in DD.
Login to DD Web console >> Hardware >> Settings >> Host Mappings.
Add your all DD and Backup server host entries here.
Mizicke52731
9 Posts
0
April 29th, 2015 08:00
I had the same issue and adding all of the DataDomains to their Host Mappings resolved the issue. I had to add the DataDomain itself to it's own Host Mappings as well.
kevinstanford
7 Posts
0
March 9th, 2016 09:00
Hi
I have the same error. The DNS lookup works on the DDs so doesnt seem to be an issue there.
Source
bk01 = A.120
dd01 = A.46
dd01-replication = A.36
dd01-ifg1 = B.20
Static route sends traffic to dd02-replication out of dd01-replication
Target
dd02 = X.46
dd02-replication = X.36
dd02-ifg1 = Y.20
All Veeam backup work locally to source and DD replication works out of replication network to target
However i am now trying to configure Networker Clones and get the 5009 error
nsrclone: Failed to obtain filecopy status for ssid=601887854, cloned 0 bytes out of 875764080: Retrieving the status of a file copy operation failed [5009]
Any input appreciated