Unsolved
This post is more than 5 years old
2 Intern
•
14.3K Posts
1
7102
What is "Max Client Connections"
When I run ddboost show conn I get listed connected clients, those active and I also get to see max client connections. What is that one about? I see most of the time this setting now on 180 as value (I remember that before I went to 5.2.4.2 I have seen it to be 340). Is it dynamic? Does list current limit on number of ddboost connection? Is it general parameter or ifgroup related?
o17Uu33DCF12520
2 Intern
2 Intern
•
1.1K Posts
1
February 9th, 2014 22:00
The max connection limit equals to the max number of stream count supported by all protocols including ddboost in DD. It is a general parameter which is determined simultaneously by DDOS and DD model.
You could read through this KB doc to get details about DD stream count.
https://emc--c.na5.visual.force.com/apex/KB_HowTo?id=kA0700000004Rvr
ble1
2 Intern
2 Intern
•
14.3K Posts
0
February 10th, 2014 01:00
Hi Kevin,
Thanks. How come that previously it did say 340? DDOS bug? Further, I believe this stream counts have doubled somewhere in 5.2 or 5.3, but I do not see that reflected in documents for DDOS as per link you have provided (also, document link to DDOS 5.4 seems to be broken). Last, but not least, this information is obtained under ddboost command - if not using ddboost which other command (vtl and nfs presumably) would one use to obtain this information?
o17Uu33DCF12520
2 Intern
2 Intern
•
1.1K Posts
0
February 10th, 2014 17:00
Hi Hrvoje,
No problem. The value you saw isn't a bug certainly. Like I said, it is not just determined by DDOS only, but also by DD model. This information hasn't been put in any public document but internal material. As far as I know, it's the only command.
ble1
2 Intern
2 Intern
•
14.3K Posts
0
February 11th, 2014 01:00
Hi Kevin - I'm talking about same boxes (DD890).
kevinstanford
7 Posts
0
February 12th, 2014 03:00
Hi Kevin,
Idont have access to this link
https://emc--c.na5.visual.force.com/apex/KB_HowTo?id=kA0700000004Rvr
Is it available anywhere else to partners?
thanks
Kevin
ble1
2 Intern
2 Intern
•
14.3K Posts
0
February 12th, 2014 03:00
There is known issue if you use direct link or if you use multiple logins (eg. one for ECN and one for EMC support) which may give you access issue. I just tried the link and it works for me - and I'm customer. If you are partner you should have access and if not you must sort out access permission with EMC for your userid (as partner, you can contact your account manager to sort it out for you)..