1 Rookie
•
24 Posts
0
2255
May 11th, 2021 11:00
SNMP alert forwarding configuration using snmp v3
Hello,
How can I enable/setup SNMP v3 for forwarding the SNMP alerts from Openmanage Enterprise?
I do see the option to use SNMP V1 or V2 and I do see the option to setup SNMP v3 only for when receiving the alerts from iDRAC.
Thank you,
No Events found!
Dell-DylanJ
6 Operator
•
2.9K Posts
1
May 13th, 2021 10:00
Hello,
Please don't take this as any sort of official statement, but I *THINK* that this is supposed to be added in OME 3.6, which to my understanding, is coming out in the next couple of weeks.
DELL-Young E
Moderator
•
5.4K Posts
•
37 Points
0
May 11th, 2021 21:00
Hi, thanks for choosing Dell. Could you please take a look at this?
Configuring SNMP V3 Traps
https://dell.to/3y2oqOB
danielpat
1 Rookie
•
24 Posts
0
May 13th, 2021 06:00
Thank you for the link.
I do see the instructions are for Openmanage Essentials and I don't see the SNMP v3 on the Openmanage Enterprise.
it may need to be enabled first?
Thank you.
DELL-Charles R
Moderator
•
4.7K Posts
•
25.5K Points
1
May 13th, 2021 07:00
Hello danielpat,
Sorry about that. I sure she meant to get you the OM Enterprise documentation.
This is for OMEnterprise 3.5 -
Configure SMTP, SNMP, and Syslog alerts. Manage incoming alerts.
Page 145-146
https://dell.to/2RhetMz
danielpat
1 Rookie
•
24 Posts
0
May 13th, 2021 08:00
Thank you Charles,
I do see "Select the SNMP version type from the SNMP VERSION drop-down menu. Currently, only SNMP V1 and SNMP V2 versions are supported." on page 94.
Do you know if there are any plans to add SNMP v3 for SNMP Alert Forwarding on Openmanage Enterprise?
Regards.
danielpat
1 Rookie
•
24 Posts
0
May 13th, 2021 11:00
Thank you.
danielpat
1 Rookie
•
24 Posts
0
June 21st, 2021 08:00
Thank you Dylan,
Openmanage 3.6 version shows the SNMPv3 option to send the alerts.