Unsolved
This post is more than 5 years old
1 Message
0
1119
Cross-Verify IDRAC settings
Hi All,
I have a batch file, which has set of commands. The commands configure the idrac to enabled below things:-
1) Alert Enable
2) Set SNMP Community String
3) Destination Adress
4) Enables warning and critical alerts for SNMP notifications.
I ran the commands, now the question is , as to how to cross-verify the idrac settings if the command has actually ran or not adn the configurations are in place.
Thanks
Ankur Mishra
Dell-JimmyP
311 Posts
0
March 12th, 2018 08:00
Hi,
Please send a private message with your service tag to ensure we have all appropriate information on your system.
Thank you,
ankurmishra
23 Posts
0
June 13th, 2018 02:00
Hi Jim,
Thanks for the guidance. But can you please let me know step by step , how to achieve "Please send a private message with your service tag to ensure we have all appropriate information on your system."
I am sorry, but i am new to this tool.
Thanks
Ankur
DELL-Shivendra K
685 Posts
0
June 15th, 2018 02:00
Hi Ankur,
Thanks for the query.
This can be easily achieved by using Configuration Deployment and Compliance feature of OpenManage Essentials. Please note, a per node license is required on each of the target servers you wish to use these features on. Below is a white paper that provides details around using these advanced features:
http://en.community.dell.com/techcenter/extras/m/white_papers/20444397