Unsolved
This post is more than 5 years old
5 Posts
0
37941
ESXi 4.1 and OME not getting SNMP, WSMAN is working
Hi,
I have the latest vib installed on my ESXi host
~ # esxupdate query
---------Bulletin ID--------- -----Installed----- -------------Summary-------------
ESXi410-Update01 2011-05-02T03:20:23 VMware ESXi 4.1 Complete Update 1
ESXi410-Update02 2011-11-10T08:09:05 VMware ESXi 4.1 Complete Update 2
ESXi410-201201402-BG 2012-02-06T05:41:34 Updates VMware Tools
ESXi410-201201401-SG 2012-02-06T05:41:34 Updates Firmware
Dell_OpenManage_ESXi410_OM650 2012-02-17T06:02:15 OpenManage 6.5 for ESXi410
~ # /usr/lib/ext/dell/srvadmin/bin/dataeng status
dsm_sa_datamgrd (pid 6126 ) is running
dsm_sa_eventmgrd (pid 6666 ) is running
dsm_sa_snmpd (pid 6680 ) is running
C:\Program Files (x86)\VMware\VMware vSphere CLI>vicfg-snmp.pl --server ServerIP --show
Enter username: root
Enter password:
Current SNMP agent settings:
Enabled : 1
UDP port : 162
Communities :
xxxx
Notification targets :
10.138.4.67@162/xxxx
but on my OME server
When I run the SNMP test in Troubleshooting tool, i get:
The SNMP read request has failed for Get Community name - xxxx
Under the machine details - Software Agent Information
Server Administrator is flagged as yellow with Agent Version showing as N/A
Any ideas?
Regards,
Lester
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
February 20th, 2012 08:00
Hi Lester, thanks for the post.
First I will point you at this thread for setting up ESXi and OME. Be sure to have a look.
en.community.dell.com/.../19424735.aspx
en.community.dell.com/.../19436722.aspx
Also,
for ESXi you just need WSMan, not SNMP for discovery.
The SNMP part for ESXi only comes into play for "traps", not discovery. So the TS tool SNMP test is not relevant here.
Thanks,
Rob
lester74
5 Posts
0
February 20th, 2012 18:00
Hi Rob,
I have read the first link before so like Mikey in the 2nd thread, the SNMP configuration threw me a curve ball.
I managed to access the OMSA via another server so that's working fine but it's not showing up in OME, so it's being flagged with a warning.
Regards,
Lester
MikeyB13
33 Posts
0
February 21st, 2012 14:00
Lester - I am still in a bit of a pickle with mine, but I might be able to assist you a bit, eventhough I am using 5 and not 4.1
During your discovery/Inventory - what are you using? You should only be using WS-MAN I used Root/Password, checked "secure mode" and "trusted site"
Give that a whirl....
MikeyB13
33 Posts
0
February 21st, 2012 17:00
I misunderstood your statement of "but it's not showing up in OME, so it's being flagged with a warning." meaning that it was still showing as Unknown.
I on the other hand still cannot access my ESXi5 through another server....
Being a guinea pig is not fun :)
lester74
5 Posts
0
February 21st, 2012 17:00
Hey Mikey,
Yeah I did that already after Rob pointed out that SNMP is only used for traps. WS-MAN is setup like yours and working for most part except that I'm not getting anything for OMSA
http://prntscr.com/6cs4n
Regards,
Lester
lester74
5 Posts
0
February 21st, 2012 18:00
did you try running this from SSH or local tech support mode to check if OMSA is running?
/usr/lib/ext/dell/srvadmin/bin/dataeng status
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
February 22nd, 2012 09:00
This looks working as expected to me. We don’t get inventory from OMSA in ESXi so I guess we are not getting the OMSA version and are hardcoding it to “N/A”. The health is showing up as warning which is correct and in fact we show that agent row for displaying the health.
We are adding more inventory for this in an upcoming release (not the Q1 release).
Rob
lester74
5 Posts
0
February 22nd, 2012 16:00
Hi Rob,
Since we are unable to get inventory from OMSA, which includes hardware status. Does it mean that if we have a failure on a harddisk or RAM, there will be no alerts being issued?
Regards,
Lester
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
February 23rd, 2012 07:00
Hi Lester,
We *do* monitor health which includes hardware health. We *don't* get other inventory from OMSA. That is the difference.
But that will not prevent us from telling you when there is a hardware failure. The health status shown in the OMSA Agent row is indicative of hardware health. You can get additional info on the warning status by opening OMSA and drilling in.
This can be a bit confusing and we are doing more work on this in a subsequent release.
Thanks,
Rob
TBoneMNP
41 Posts
0
March 30th, 2012 16:00
Have you had any complaints about high bandwidth usage when using the WS-MAN discovery? I was just able to configure the WS-MAN discovery to get my ESXi hosts yesterday, and today my Network Admin is asking why the management server is using 100 MB/min.
Any thoughts on that? I realized I had 1 minute status polling turned on (that is default out of the box by the way), so I dropped that down to once a day.
Do we need to use status polling? Or can we assume that SNMP will continue to alert us when ESXi servers go down or other issues?
Thanks
DELL-Abhijit P
Community Manager
Community Manager
•
711 Posts
0
April 2nd, 2012 08:00
Thanks for your post.
Status polling once a minute does not seem normal. The default status polling interval is once per hour. Not sure how it was set to once a minute on your config. We have not heard any WS-MAN related high bandwidth usage issues. If the polling was set to one minute, it definitely explains that usage. I would advise it to set it to once per hour and see if the bandwidth utilization is acceptable.
Status polling is used for getting the server health information. It allows OME to monitor if the server reports any issues with hardware health.
Regards
Abhijit
TBoneMNP
41 Posts
0
April 2nd, 2012 12:00
While troubleshooting this high connection issue I have also discovered you cannot highlight a group of discovery ranges and disable them. As soon as you change the page and come back, they are enabled again. You have to highlight each, one at a time, and disable them.
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
April 2nd, 2012 12:00
Hi,
...really curious...
When you say you turned the server off over the weekend...which server? Target or OME server?
It's funny because the amount of data that we collect from the target via WSMan is not too much at all.
Can you check the settings again for disc/inv frequency? It should be set for something like once per day.
Also, on the portal page, there is a web part for task execution history. You should be able to view there whether you are having a bunch of tasks run with an unexpected frequency?
Otherwise, it looks like we will have to ask you to open a ticket at 800-945-3355 so we can collect more info.
Thanks!
Rob
DELL-Abhijit P
Community Manager
Community Manager
•
711 Posts
0
April 2nd, 2012 12:00
Thanks for the update. Something is not right. With status polling turned off, the only other operations would be discovery/inventory which by default once a day usually during night time. Are you running any tasks/updates for any of the targets. I'm assuming you are using OME v 1.0.1.
TBoneMNP
41 Posts
0
April 2nd, 2012 15:00
Gents, I deleted the second post as it was not entirely correct. I didn't mean to post it to be honest. I thought I had everything figured out on this server, but wanted to take a second look and get everything figured out before I trouble you with it.
At this point I'm trying to pinpoint the exact setting which causes this. I will post back.