Unsolved
This post is more than 5 years old
7 Posts
0
15997
Ignore Unknown (PC's and Laptops) and Printers
So far love the new OpenManage Essentials. I would like to be able to ingnore the unknon devices and printers. We have rmote offices where servers, switches, printers, computers, etc are all on the same subnet. The "junk" data is polluting the Home Portal and reports. Anyone know how i might accoplish this without spending days excluding the IPs for these devices?
victor_waelchli
91 Posts
0
April 26th, 2012 08:00
If you select the Instrumented Devices option in the Discovery schedule it will only discover the configured Dell Devices-
From page 67 of the users guide - support.dell.com/.../UG_en.pdf
Manage - > Discovery and Inventory - > Configuration -> Discovery Schedule.
Discover -
• All Devices—Select to discover all devices that
respond to an Internet Control Message Protocol
(ICMP) ping.
• Instrumented Devices—Select to discover only
devices that have instrumentation (such as Dell
OpenManage Server Administrator, Dell
OpenManage Array Manager, and Dell
PowerConnect) for Simple Network Management
Protocol (SNMP), Windows management
Instrumentation WMI), Intelligent Platform
Management Interface (IPMI) management, or WSManagement
(WS-Man). See agents supported for
more information about systems
DELL-Rob C
2 Intern
2 Intern
•
2.8K Posts
0
April 26th, 2012 14:00
Yep. Printers are discovered via SNMP. You can right-click hide the Printer node in the device tree. But I guess that won't be everything you are looking for.
Rob
MMSTroy
7 Posts
0
April 26th, 2012 14:00
Thanks for the reply that got rid of all the unknown but still have all the printers. Could they be coming from SNMP?
rdenne
6 Posts
0
June 7th, 2012 17:00
I believe if we turn on the Instrumented Devices option we aren't able to discover some of our VMware ESX/i servers. Is there a workaround for this?
DELL-Abhijit P
Community Manager
Community Manager
•
711 Posts
0
June 8th, 2012 08:00
Thanks for the update.
I have not heard of this before. To undetrstand the issue correctly, you are saying you choose "Intrumented Devices" as a discovery option for Discovery schedule and use WS-MAN to discover your ESXi hosts and those do not get discovered. I was able to discover ESXi server with Instrumented devices as discovery option. Can you try running troubleshooting tool WS-MAN test against those servers?
We'll do some more testing on our end to see if we can reproduce the issue.
Regards
Abhijit
rdenne
6 Posts
0
June 12th, 2012 21:00
We didn't have that option set to enable WS-Man Discovery. I've since enabled this and will test overnight.