Unsolved
2 Posts
0
2960
OME Discovery and Inventory: Some machines are Unclassified
Greetings gentlemen,
It's my first time to use OME, when I ran Discovery and Inventory using SNMP and WMI protocol. I noticed some dell machines got discovered as client and some are unclassified. Am I missing something? I made sure the SNMP works fine through Troubleshooting tools. Thanks in advance.
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
December 14th, 2018 11:00
Hello
OpenManage Essentials can acquire information using various methods. The information that it can acquire will differ by method. I would start by checking to make sure the community is the same on the systems that are not classifying correctly. You can also check OME documentation to see what type of agent is required to get information from the various systems supported by OME.
http://www.dell.com/openmanagemanuals/
Group membership should be rule based. If OME is able to get enough information from a system, like the make and model, then it should have a default grouping rule for it. If there is no rule for the information it receives then it will go into something like unclassified. If the systems in unclassified do have a make/model showing then you may just need to create a group to put them in.
Thanks
MdmBarbarella
1 Rookie
1 Rookie
•
88 Posts
0
December 19th, 2018 08:00
TaigaObi
2 Posts
0
January 11th, 2019 08:00
DELL-Shivendra K
685 Posts
0
January 13th, 2019 23:00
Please make sure that you have Dell Command | Monitor installed on business client devices for proper support in OME.
https://www.dell.com/support/article/us/en/04/sln311855/dell-command-monitor?lang=en