The only requirement is that you have a working 780 multi-cast boot disk that uses e1000.dos driver for contacting the multi-cast session. I use winimage to create img files of my boot disks so all I had to do was inject the new e1000.dos driver into the 780 img file and create a new 790 boot disk from it. Worked like a champ for me. I hope this helps.
speedstep
9 Legend
9 Legend
•
47K Posts
1
May 25th, 2011 10:00
Since Novell is Kaput I would say these do not exist.
cleatus45
281 Posts
0
May 25th, 2011 09:00
...network drivers so we can Ghost....
cleatus45
281 Posts
0
May 25th, 2011 11:00
novell? ya still gotta login with DOS drivers to use ghost- at least the version we have.
speedstep
9 Legend
9 Legend
•
47K Posts
1
May 25th, 2011 12:00
You might try these.
support.moonpoint.com/.../Broadcom_57xx
Intel® 82566 Family Gigabit Ethernet Controllers
http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R252705
http://ftp.us.dell.com/network/Intel_825xx-Gigabit-Platform_A02_R252705.exe
trspcsupport
3 Posts
0
May 31st, 2011 09:00
These are not working for me. Are there any other possibilities? Thanks!
speedstep
9 Legend
9 Legend
•
47K Posts
1
May 31st, 2011 11:00
No
cleatus45
281 Posts
0
May 31st, 2011 13:00
awesome
cleatus45
281 Posts
0
October 18th, 2011 13:00
think we got it- we are actually usiing sccm now- yay.... but we are working somewhat...thanks everyone for the help!
spidermatt67
2 Posts
1
October 18th, 2011 13:00
Cleatus, I assume you are trying to multi-cast. If so, I found a working solution (Ghost 7.5) after downloading drivers from here:
downloadcenter.intel.com/Detail_Desc.aspx
The only requirement is that you have a working 780 multi-cast boot disk that uses e1000.dos driver for contacting the multi-cast session. I use winimage to create img files of my boot disks so all I had to do was inject the new e1000.dos driver into the 780 img file and create a new 790 boot disk from it. Worked like a champ for me. I hope this helps.