UNSOLVED
J
Jbrobertson74
1 Message
0
20740
December 4th, 2017 13:00
Diagnostic error message 2000-0145
I’ve read quite a few posts from others who have received this error message. I’m looking to understand what hardrive I need to replace. Ive read there are two drives which is confusing to me. How would this be determined? What hardrive would work best. I have a 4yr old Vostro 3550. I can only get as far as the windows page. Cannot access any documents or the internet. Also is there a scenario where replacing the hardrive won’t work? How would that be determined?
If you receive an error during PSA Diagnostics, look below for the associating error code.
Remove and reinstall the Hard Drive for the error codes:
- 1000-0141
- 2000-0141
- 1000-0142
- 2000-0142
- 1000-0143
- 2000-0143
- 1000-0144
- 2000-0144
- 1000-0145
- 2000-0145
- 1000-0146
- 2000-0146
- 2000-0151
Error Code
Error Message
Link to Possible Fix
PSA 1000-0111
PSA+ 2000-0111(Name of Exception) exception occurred at selector XXh offset XXh.
PSA+ 2000-0112
CPU (x): Processor machine check exception error.
PSA+ 2000-0113
Processor machine check error detected.
PSA 1000-0122
Memory test initialization failure.
PSA 1000-0123
PSA+ 2000-0123Memory integrity test failed.
PSA 1000-0141
PSA+ 2000-0141No drive detected.
PSA 1000-0142
PSA+ 2000-0142Drive Self Test failed. Status byte = XXh.
PSA 1000-0143
PSA+ 2000-0143Drive Smart read command failed.
PSA 1000-0144
PSA+ 2000-0144No support for Drive Self Test.
PSA 1000-0145
PSA+ 2000-0145Timeout waiting for Drive Self Test to complete.
PSA 1000-0146
PSA+ 2000-0146DST Log contains previous error(s).
PSA 1000-0147
PSA+ 2000-0147Unit (x): IDE status failed. Status byte = (x) Control Code = (x) Msg = (s).
Unit (d): Optical drive BIST – (s).
PSA 1000-0148
PSA+ 2000-0148IDE ERROR: status (x) (s)
PSA+ 2000-0149
No optical drive detected
PSA 1000-0212
PSA+ 2000-0212CMOS failed the pattern test.
PSA 1000-0213
PSA+ 2000-0213The CMOS battery failed
PSA 1000-0214
Failure in DMA %s Port: XXh.
PSA 1000-0221
PSA+ 2000-0221Interval Timer Channel 0 (mode 0) is not generating interrupts
PSA 1000-0222
Interval Timer Channel 0 (mode 3) is generating the wrong interrupt count per second.
Error Code
Error Message
Link to Possible Fix
PSA 1000-0223
Interval Timer initial clock output level in mode XX is incorrect.
PSA 1000-0224
Interval Timer had wrong time period in mode XX
PSA 1000-0231
PSA+ 2000-0231Failure in Interval Timer in mode XX.
PSA 1000-0232
PSA+ 2000-0232The RTC did not generate periodic ticks.
PSA 1000-0233
PSA+ 2000-0233The RTC 'Seconds' register is not updating.
PSA 1000-0234
PSA+ 2000-0234Timeout waiting for RTC update flag to set.
PSA 1000-0235
PM timer 1 had wrong time period. Expected (d), Actual (d).
PSA 1000-0241
PSA+ 2000-0241Error enabling A20 gate.
PSA 1000-0242
PSA+ 2000-0242No interrupt detected for IRQ XX - (Name of Interrupt).
PSA 1000-0312
Keyboard test timed out waiting for keyboard response.
PSA+ 2000-0313
Error detecting internal touchpad or pointing stick.
PSA 1000-0321
PSA+ 2000-0321Unable to detect LCD.
PSA 1000-0322
PSA+ 2000-0322Error accessing the LCD inverter.
PSA 1000-0326
PSA+ 2000-0326LCD inverter error, unable to turn lamp ON/OFF.
PSA+ 1000-0331
No video adapter found.
PSA 1000-0332
Video memory failed.
PSA 1000-0333
PSA+ 2000-0333Graphics test timed out waiting for keyboard response.
PSA 1000-0334
PSA+ 2000-0334User reported that graphics patterns were not displayed correctly.
PSA+ 1000-0411
Hardware Detect Error - (s) not detected.
Error Code
Error Message
Link to Possible Fix
PSA+ 1000-0412
Hardware Detect Error - Auxiliary LCD cable not detected.
PSA+ 1000-0413
Detect Error - LCD cable not detected.
PSA+ 1000-0414
Hardware Detect Error - Inverter cable not detected.
PSA+ 2000-0151
Hard Drive (d): - Incorrect status: (x) (s) PSA+ 2000-0152
Optical Drive (d): - Incorrect status: (x) (s)
ejn63
11 Legend
•
87468 Posts
•
321253 Points
19467
0
Posted December 4th, 2017 18:00
There is only one drive in the system -- it's a single, standard 2.5" SATA notebook drive.