Unsolved
This post is more than 5 years old
3 Posts
0
7937
Error during boot sequence
It says no boot device availble i have a dell precision workstation 490 series which runs on windows 7 proffesional and only recently has this problem arrised. I am really not good with computers so if anybody could explain to me the repair procedure in simple terms i would be grateful
DELL-Hemalatha
2.8K Posts
0
August 3rd, 2015 07:00
Hi,
Please shut down the system , restart and tap on f2 and look for the option internal HDD. Look if its showing the hard drive or does it says none.
Again restart the machine, restart and tap on f12, select the option diagnostics and let the test complete.
Do let us know the outcome.
Usually if the hard drive is not detected , you get these errors.
Regards
DELL-Hemalatha
2.8K Posts
0
August 6th, 2015 00:00
Hi
We are still awaiting your response
Regards
AKASH261022
3 Posts
0
August 8th, 2015 02:00
Hi there is no internal hdd option
AKASH261022
3 Posts
0
August 8th, 2015 02:00
It also says that my Drive 0 : SATA-0 is off
and its the same for drive 1,2,3,4
where as ,
Drive 5: PATA-0
Drive 6: PATA-1
are on
RoHe
10 Elder
10 Elder
•
43.6K Posts
0
August 8th, 2015 14:00
In BIOS setup select the option Drives 0 through 4. Highlight Drive SATA 0 and look for the option to enable it on that screen.
If you have drives connected to SATA1, 2,3... enable those too. But don't enable any SATA port that doesn't have a drive connected to it.
Be sure to save the changes, before exiting BIOS setup. Exit setup and see if it boots now.