Unsolved
This post is more than 5 years old
4 Posts
0
16730
GeForce 7800 GTX
Has anyone got one of these cards to work in a DELL Dimension 5150? Just need to know as I received my new DELL Dimension 5150 2 days ago and whenever I put the card in the screen has artifacts all over it even at the boot screen. This goes on and when the card gets into windows sometimes you can use it for a few minutes before the monitor stops receiving a signal. Only way back is to shut down the pc by holding down the power button. Have tried all the latest drivers and chipset utilitys. Also I am running Windows Media Centre 2005.
The card is a Geforce 7800 GTX PCI-Express. I have a DELL Dimension 5150 with 1Gb of RAM and also a 3.4GHz processor. The PSU was upgraded as is running at 580W.
Cheers. Any suggestions welcome.
corrupthalo
4 Posts
0
October 16th, 2005 13:00
CSPlayer089
563 Posts
0
October 16th, 2005 13:00
did you make sure that
1). the card is properly seated in the pci-express slot?
2). the 6-pin power connector is attached to the card all the way?
other than that i dont know it may be a faulty card
corrupthalo
4 Posts
0
October 16th, 2005 17:00
how can i make sure of that?
Surely it shouldnt overheat when its just booting up? The screen get distorted even when the pc first switches on.
shanahanfanpat
9 Posts
0
October 16th, 2005 17:00
CSPlayer089
563 Posts
0
October 16th, 2005 18:00
Jaxxon29
2 Posts
0
October 18th, 2005 15:00
sorry to hijack this corupthalo ;-)
but how was the PSU installation? What brand Power supply did you use? Did you use any special Dell connectors? I'm having a heck of a time getting anything definitive on this subject.
Thanks in advance!
drew-and-not-u
494 Posts
0
October 18th, 2005 16:00
It may not be getting enough power from the PSU. The symptoms you describe are concurrent with those that occured the couple times I've tried to boot my system after forgetting to plug the power cord back into the videocard.
corrupthalo
4 Posts
0
October 18th, 2005 16:00
I used a Hiper Type-R Series 580W. It came out of my old p4 which I didnt need so much power for anymore. Was a bit scary swopping it out but thought that was what was causing my geforce failures. I didnt need any special connectors but I checked the colour code of the cables from the new power supply to the dell one to make sure..
Hope this helps.
Jaxxon29
2 Posts
0
October 18th, 2005 17:00
CSPlayer089
563 Posts
0
October 18th, 2005 21:00
:smileyhappy:
nice rig drew and not u. me jealous :smileysad: