Yessi
1 Copper

Help with dell vostro 230!!!

My daughter was donated a computer and we really trying to get it to work but there is nooo way.  If anyone can help

.

I turn it on and the screen is black asking for a password. During start up I have options f2 and f12. Both options lead back to this same screen.  I've tried f11 repeatedly. Nothing ..  

Tags (1)
0 Kudos
5 Replies
Highlighted
Moderator
Moderator

RE: Help with dell vostro 230!!!

Yessi,

The Vostro 230 shipped with Windows Vista or Windows 7. You will need to get a Windows disk, format and reinstall Windows and Drivers. Your better off obtaining a Windows 7 disk.

Below are links to help you get your system installed with Windows and driver install information. If you need any further help you will need to contact Dell Support. at 1-800-624-9897. US 

Windows 7 Support

http://dell.to/2k8t5Yw

Vostro 230 Drivers, Downloads and Manuals- Be sure to view the online manual for help as well.

http://dell.to/2k8t6M4

Driver Install Order- Follow the install order so that your hardware will work and perform propery.

http://dell.to/2k8jgd1

Drivers Help

http://dell.to/2k8gLaH

0 Kudos
7- Thorium

RE: Help with dell vostro 230!!!

Have you just tried pressing Enter when it asks for the password?

Ron

   Forum Member since 2004
   I am not a Dell employee

0 Kudos
Yessi
1 Copper

RE: Help with dell vostro 230!!!

I have and it says system haulted

0 Kudos
Yessi
1 Copper

RE: Help with dell vostro 230!!!

Thank you

0 Kudos
7- Thorium

RE: Help with dell vostro 230!!!

Vostro 230 or 230S ?

You may need to replace the motherboard battery, especially if this system has been sitting unplugged for a while. It's a CR2032 3-volt battery, ~$2 at discount stores. Instructions to replace the battery are in the manual. I'd do that before doing anything else, if nothing else than to rule the battery out.

Since it sounds like Windows never starts to load, there may be a system password set. To clear that, you'd have to move the password jumper on the motherboard. The location of the jumper is shown in the manual for the 230 (NOTE: 230S may be different), but the manual doesn't say which pins to move the jumper onto to clear the password. Maybe Jesse can help with that, and be sure to write down which pins the jumper is on now, before you do anything so you know where to put it back after clearing the password.

If this is beyond your abilities, maybe you have a geeky friend who can help...

Ron

   Forum Member since 2004
   I am not a Dell employee

0 Kudos