Unsolved
This post is more than 5 years old
1 Message
0
1151
Increasing RAM
Can anyone tell me if and how I can increase the RAM on my Dimension 3100 it is currently only about 248MB.
Unsolved
This post is more than 5 years old
1 Message
0
1151
Can anyone tell me if and how I can increase the RAM on my Dimension 3100 it is currently only about 248MB.
Top
shesagordie
10 Elder
10 Elder
•
46K Posts
0
January 11th, 2010 12:00
77lk
The E310/3100 supports a maximum of 2gb [2x1gb modules] of memory, see HERE
How to Install Memory in a D-3100/E310 System.
For memory that's certified to work in the D-3100, has a lifetime warranty and free S&H, go HERE
Bev.
Mary G
4 Operator
4 Operator
•
20.1K Posts
0
January 11th, 2010 12:00
You are looking at the wrong listing for RAM. No such amount as 248mb. Go to Control Panel, System and see the actual ram amount. You should post your operating system for more specific answers and explain what you mean by RAM. RAM is random access memory--the amount of memory that is installed on the motherboard.
Alexandra_P
2.6K Posts
0
January 11th, 2010 12:00
Easiest way to figure out what RAM is compatible is to use a reputable online vendor like Crucial.com (link below) - either select your model or use their system scanner to see what your options are. For XP on an older system 1GB total is usually plenty, though with the 2 memory slots you could go up to 2GB total (1GB per slot):
http://www.crucial.com/
Instructions on how to replace the memory modules in your service manual below (under removing and installing parts).
http://support.dell.com/support/edocs/SYSTEMS/dim3100/en/sm/index.htm