Unsolved
This post is more than 5 years old
3 Posts
0
1449
OptiPlex 9010 small form factor BIOS A24 not able to setup three monitor
Hi,
Anyone can have any solution for OptiPlex 9010 small form factor BIOS A24 to setup three monitor with VGA , display port to DVI and display port to DVI?
Best Regards,
Gan
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
November 14th, 2016 04:00
The configurations that support 3 displays are limited to the ones listed below. If any other type of dongle or adapter that changes the input type on a port is used (Single-link passive DisplayPort to DVI, DisplayPort to VGA, for example), the system will automatically restrict the video card to two displays.
The supported three display configurations are:
Two (2) displays connected DisplayPort to DisplayPort (No adapters) and one display connected through VGA. (Recommended configuration)
Two (2) displays connected via active Dual-Link DisplayPort to DVI adapters (Dell Part Number 470-AANW) and one display connected through VGA. (This configuration requires 2 available USB ports)
One (1) display connected DisplayPort to DisplayPort (No adapters), one (1) display connected via active Dual-Link DisplayPort to DVI adapter (Dell Part Number 470-AANW) and one display connected through VGA. (This configuration requires 1 available USB port)
NOTE: The Dual-Link DisplayPort adapter has a USB and a DisplayPort connector. Each adapter will require 1 dedicated USB port.
wheng_g
3 Posts
0
November 14th, 2016 16:00
Dell BIZLINK Display Port to DVI Dual Link Adapter USB Powered
DP/N : XT625 / CN-0XT625
is it compatible for Dell 9010 SFF 3 monitor setup?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
November 15th, 2016 05:00
While it may be compatible with the 9010, any other type of dongle or adapter that changes the input type on a port is used (Single-link passive DisplayPort to DVI, DisplayPort to VGA, for example), the system will automatically restrict the video card to two displays.
wheng_g
3 Posts
0
November 29th, 2016 15:00
Hi,
we have purchased two "Dell BIZLINK Display Port to DVI Dual Link Adapter USB Powered "
(DP/N : XT625 / CN-0XT625) but with bios version 13,16,23,24 none of show "Multi Display" option in video categories.
in Windows 10 professional with Intel driver, the OS able to detect three screen but only activate two screen , the thrid screen was disable and none of the option will able to let three screen work at the same time.
Please advice how to made three screen work concurrently.
If we install another half height low profile graphic card, will it working concurrently with on board graphic card as a three screen solution?
Best Regards,
Gan
robert p
4 Operator
4 Operator
•
9.4K Posts
0
November 30th, 2016 07:00
Two (2) displays connected DisplayPort to DisplayPort (No adapters) and one display connected through VGA. (Recommended configuration)