Unsolved
This post is more than 5 years old
3 Posts
0
1251
T5400 single bit memory error
Hello,
I have T5400 running X5460 with 8GB ram which I recently upgraded to 24GB. 6x4GB HYNIX same series. During startup it gives me error "Single bit memory error on dim 3 or 4..." Problem is that error message is not always displayed. I executed bios diagnostics tool[all tests] which took about 4hours and all tests were passed. After test - restart - error message again. Today hard reset - no error message. I also switched memory chips slot 6 with 4 which helped for two days.
I'm bit puzzled what is wrong and how to fix it ?
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
June 23rd, 2016 07:00
Did the error follow the module, or stick to the same slot?
gkulka
3 Posts
0
June 24th, 2016 04:00
Today no error during start. But it's always 3 and 4 mentioned in error message. Before upgrade slot 3 was used and there was no problem.
gkulka
3 Posts
0
June 29th, 2016 13:00
Does it change anything if now error message is Single bit memory error reviously detected on dim 3 or 4..." ?