Unsolved
This post is more than 5 years old
3 Posts
0
18306
T5810 Hard Drive Bay/Configuration
Does anybody know the specific configuration for the T5810 Hard Drive Bays in terms of total capacity for 2.5 and 3.5 drives ? The manual and sales doc is a little ambiguous . Plan would be to order with a 256 G SSD as the boot drive , and then add an additional 480 G SSD , plus 1-2 3.5 " spinning drives from the machine it would be replacing . What I think , based on what I see , is the bays can accommodate up to 4 drives , either 2.5 or 3.5 , but the specs say 2 3.5 drive bays only ..
Also, if ordered with only 1 drive , are the SATA and power connectors present for full expansion ?
Thanks in advance ..
RoHe
10 Elder
10 Elder
•
43.6K Posts
0
January 18th, 2015 16:00
You might get a better response if you re-post this in What do I buy.
snoylekim8
3 Posts
0
January 18th, 2015 16:00
Ok .. I will ..thanks ..didn't see that as an option , ..
snoylekim8
3 Posts
0
January 18th, 2015 19:00
..and , someone named Teddi redirected it back here (!) ..seems like pretty straightforward questions, and a 'buy' decision will depend on the answer, so , let's see if someone answers ..
RoHe
10 Elder
10 Elder
•
43.6K Posts
0
January 19th, 2015 11:00
Sorry 'bout that. At least you're covered in both places now. :emotion-5: