Highlighted
Borrax
Bronze

Dell Optiplex 755 Mini-tower Motherboard Upgrade

I have a Dell Optiplex 755 mini-tower and I would like to upgrade the motherboard to support SATA III and the new iSeries processors.  I absolutely love the Dell Optiplex 755 case and it would be hard to replace it with something comparable.   Most of the cases out there look like UFO spaceships or crotch rockets.  The Dell Optiplex 755 case is quiet and refined without the unnecessary frills.

I am thinking of purchasing a Dell Optiplex 980 motherboard or a third-party motherboard, but I am hesitant to do it without knowing if the motherboard will be compatible.  I've googled all over the net and it's unclear whether the Dell Optiplex 755 mini-tower supports a standard BTX motherboard or a 980 motherboard.  Wikipedia lists all of the OptiPlex models (see http://en.wikipedia.org/wiki/Dell_OptiPlex), but it is unclear which models support standard motherboards.  It only mentions that "later" models support standard BTX motherboards.

Can anyone provide me with this information specifically for the Optiplex 755 mini-tower?  Also, is the power supply compatible as well?  I've read in a few boards that the power supply on some Dell models will fry non-Dell boards.  I'm almost willing to pull out the Dremel if I have to

Thanks in advance.

0 Kudos
3 Replies
speedstep
Diamond

Re: Dell Optiplex 755 Mini-tower Motherboard Upgrade

The power supply is a non issue.  The 980 motherboard is NOT a drop in replacement.

Report Unresolved Customer Service Issues here
I do not work for Dell. I too am a user.
The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support

Get Support on Twitter @DellCaresPro

Borrax
Bronze

Re: Dell Optiplex 755 Mini-tower Motherboard Upgrade

OK so the 980 motherboard won't fit.  Are there any third party ones that will?  Can't I buy an Intel or ASUS motherboard and put that in?

0 Kudos
Davet50
Diamond

Re: Dell Optiplex 755 Mini-tower Motherboard Upgrade

Most non dell board will not work. Dell boards and cases are proprietary. Unless you are handy with a Dremel tool.

 Home Built Sandy Bridge P8P67 i7 2600k @ 4.5 GHz 8gigs GSkill Ripjaws. Corsair 800D Case and AX1200 Ps X-Fi Titanium Fatal1ty pro PCIe Sound Card
Dell Studio XPS 1645  Window 10 Pro

Forum member since 2003

0 Kudos