I am deploying to a 7050 from Deployment Workbench.
Got the CAB File
Created the Selection Profile>Task Sequence>and injected the drivers with the 7050 CAB File.
Updated the Deployment Share.
I keep getting this Error Message on my 2 Brand New 7050's
speedstep
9 Legend
9 Legend
•
47K Posts
1
March 6th, 2017 04:00
PCI VEN 8086 IS INTEL. DEV 153E
Intel Ethernet I217-LM
Intel I2xx/825xx Gigabit Ethernet Network Controller Driver
There are also chipset and Intel USB 3.0 eXtensible Host Controller Driver issues hense the skylake install dvd.
There is support for this but it is not free.
ferdi015
3 Posts
0
March 21st, 2017 07:00
I used this CAB-file aswell. Using SCCM 2012 R2.
I updated by boot image with the NIC drivers in de CAB-file. Then after installing the drivers in the task sequence I give a reboot. Then my systeem comes up with an error:
Error: Windows failed to start. A recent hardware or software change might have caused the issue
I've tried to disabled to following drivers but no result:
ASMedia USB3.0 eXtensible Host Controller
Intel HD Graphics 510
AMD Radeon
Intel USB 3.0 eXtensible Host Controller
ejn63
1 Rookie
1 Rookie
•
87.5K Posts
0
March 21st, 2017 10:00
What OS and version are you installing, and which model CPU is in the system?
jalacce_c1083f
2 Posts
0
May 3rd, 2017 13:00
Did you update WinPE with the WinPE drivers for the OptiPlex 7050?
hpetit
7 Posts
0
June 27th, 2017 06:00
Hi, strange I never had this message.
I received three 7050, I uploaded the cab, insert the network driver into the boot image but when I boot in PXE, it restarts automaticaly just before the task sequence. Obviously, the network driver I inserted is not the good one. Could you please tell which driver did you add in your boot image ?
If you can make a zip file of it and attach it to your message.