Unsolved
This post is more than 5 years old
13 Posts
0
34034
XPS 200-No Audio
System:
2005 XPS 200, XP Media Center SP2, SigmaTel High Definition Audio Inoperative.
Device Manager Indicates: "SigmaTel High Definition Audio Codec" has the Yellow exclaimation point next to it.
System Properties Indicates:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
Have tried to install drivers from Dell site and get error message indicating they are not correct drivers for the system.
Last (2) attempts to delete driver resulted in a system lock-up and reboot.
NOTE: I do not know if this is directly related or not but, when the machine boots up, the following error message comes up with a "beep" from what sounds like the mother board:
"Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\DLCJtime.dll"
Any assistance is greatly appreciated.
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 13th, 2007 09:00
BlaiseT
13 Posts
0
October 13th, 2007 10:00
BlaiseT
13 Posts
0
October 13th, 2007 12:00
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 13th, 2007 12:00
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R114282.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R114282. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R114282 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 13th, 2007 15:00
BlaiseT
13 Posts
0
October 13th, 2007 16:00
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 13th, 2007 17:00
BlaiseT
13 Posts
0
October 14th, 2007 12:00
BlaiseT
13 Posts
0
October 14th, 2007 13:00
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 14th, 2007 13:00
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 14th, 2007 21:00
BlaiseT
13 Posts
0
October 14th, 2007 22:00
fireberd
9 Legend
9 Legend
•
33.3K Posts
0
October 15th, 2007 09:00
BlaiseT
13 Posts
0
October 15th, 2007 21:00