This post is more than 5 years old
6 Posts
0
42528
Problems with setting the assettag CCTK Optiplex 790
I'm using CCTK version 2.0.1.0, which states it supports the Optiplex 790
When i execute the command "cctk --asset=pcnumber valsyspwd=password"
It returns just fine, but when i check it the field is still empty.
I've also tried to use the same trick as with the propowntag, reset pwd >> apply assettag >> set pwd, still no succes.
Are there any other options i can try?
If not i suggest it is time for a new cctk version, fixing all the know issues...
DELL-Warren B
1.1K Posts
1
April 4th, 2012 08:00
I had one of the developers look at this and they indicated that a reboot was required for the changes to be applied. Does that have an effect?
Nino Floris
6 Posts
0
March 6th, 2012 07:00
I'm currently using version A10, which seems to be the latest version.
Is there some other token i can use? or is it just strange behavior and unfixable.
That would be nasty, we currently have 200 Optiplex 790's in storage ready to become imaged and tagged.
DELL-Warren B
1.1K Posts
0
March 6th, 2012 07:00
Are you using the latest BIOS on the 790? There were some incompatibilities with CCTK and the 790 that were addressed in a new BIOS release. A new version of CCTK will be released with the next launch of Latitude, Optiplex, and Precision systems.
Nino Floris
6 Posts
0
March 9th, 2012 18:00
Any news on this problem?
Nino Floris
6 Posts
0
April 11th, 2012 13:00
This works.
Thanks!