Equallogic Reset

I tried to reset one of my PS6000 series after reset. I got below error and its keep reinitializing. 

########################################################
#                                                       #
#          Dell (tm), Inc. Storage Array                #
#               Copyright 2001-2009                     #
# Part=70-0202 Rev=A03 SN=RMS0935328G1W5E ECO=C00       #
#                                                       #
#########################################################
Bootloader Version 2.3.3 (SWINT Rev:1)
Compiled on Wed Mar 31 16:37:31 EDT 2010
(type h for help)
Enter Ctrl-P for boot prompt

Executing bootcmd0 [dload sd primary/eqlstor.gz]
0X80231000/10920  0X85f07c00/23145556    entrypt 80231000

Executing bootcmd1 [run]
cpu_online_map=ffff, userapp_cpu_map ffff
psb_os_active_mask=0, psb_os_mask=0
boot1_info: userapp_cpu_map=ffff, psb_os_cpu_map=0
            cpu_online_map = 0xffff
Jumping to the application... 0x80231000
------------------------------------------------------------
Preparing ffff bitmask of cpus to run
No network device to cleanup
count = 16, total = 16
All slave cpus (16) ack'ed userapp init
count = 4, total = 4
All slave cpus (4) ack'ed message ring init
   FAILED

panic: decompress error on Load section
[PFAIL]
[ENTRY][BIST][EQL][TWDOG][WFP][210][CM1D][MESR][SCAN][BOOT2][PROC][BOARD][SMP][IOBUS]sd_init: high capacity card detected
[FLASH][PCIX][ETH0][ETH1][ETH2][ETH3][B2B]

Any one have any idea how can I fix this. This storage in remote location and connected with serial

Kind regards

Binaya