Unsolved
55 Posts
0
725
Equallogic ps4000 connection
Hi i have Equallogic PS4000 array disk connected to Frame 1
In order to move HyperV connected on frame 1 to frame2
i need to connect my PS4000 to my frame (chassis1) would you guide me with some steps on how to connect my PS4000 to to the Frame2
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
May 28th, 2020 09:00
Hello,
I am having difficulty understanding your question.
Is "FRAME1" a blade chassis?
If you could provide more details on how the array is connected to the servers that might make it clearer.
The array should be connected to a pair of switches, then connected to your servers.
Or are you referring to VOLUMES that need to be moved to other servers?
Regards,
Don
annonyme1
55 Posts
0
May 29th, 2020 09:00
yes i meant chassis 1
The array is connected to a Chassis (16 server ) and to a switch !
In Total i have to chassis and chassis 1 and chassis 2 and i need to move some servers (slots) from chassis 1 to chassis 2 )
dwilliam62
3 Apprentice
3 Apprentice
•
1.5K Posts
0
May 29th, 2020 13:00
Hello,
Thank for you clarifying your configuration.
As long as Chassis 2 is also properly connecting to the switch the array is attached to and the IP schema is the same the physical location should not matter.
The array doesn't lock connections to a MAC address for example.
So you need to ensure all network connectivity requirements are resolved before moving the servers.
Regards,
Don