Unsolved
This post is more than 5 years old
6 Posts
0
9574
Equal Logic PS6100xv
Hi
I have Dell Equal logic PS6100xv with controller 10 and i have connected this with Power connect 8024 ( in Dell chassis ) but i am not able to initialize the Equal logic PS 6010
Pls help
Thanks
DELL-Joe S
7 Technologist
7 Technologist
•
729 Posts
0
June 5th, 2012 06:00
Most likely the problem is in the switch/network setup. Try configuring the array using the serial cable connected to the active control module. Also, go to this link and follow each step to ensure you have all the components configured properly:
en.community.dell.com/.../3615.rapid-equallogic-configuration-portal-by-sis.aspx
-joe
TechExpert1
6 Posts
0
June 6th, 2012 05:00
Hi Joe
Thanks for you reply... do you know any configuration details about Power connect 8024
Thanks in advance
DELL-Joe S
7 Technologist
7 Technologist
•
729 Posts
0
June 6th, 2012 07:00
The configuration for the 8024F is listed on the link I provided (but it's a little hard to see, look for the "SAN switch reference architectures" link). In any event, here is the URL it points to:
en.community.dell.com/.../3590.san-switch-reference-architectures-by-sis.aspx
-joe