Unsolved
This post is more than 5 years old
5 Posts
0
39385
Volume recovery bin is disabled. Deleted volumes can not be recovered.
Please tell me how to enable Volume recovery bin in equallogic?
Unsolved
This post is more than 5 years old
5 Posts
0
39385
Please tell me how to enable Volume recovery bin in equallogic?
Top
DELL-Joe S
7 Technologist
7 Technologist
•
729 Posts
0
February 12th, 2013 13:00
Unless you enabled this feature BEFORE you deleted the volume, I will not be able to restore the deleted volume. You would need to restore from a replica or a backup.
Your group needs to be on v6.x or higher. To enable you need to use the CLI command:
Format
recovery-bin volume subcommand
Subcommands
Subcommand Description
disable Disable recoverable volume feature
enable Enable recoverable volume feature
purge volume Permanently deletes a single recoverable volume
purge-all Permanently deletes all recoverable volumes
restore volume Restores recoverable volume
show Displays all recoverable volumes
This is explaned in further detail in the "Dell EqualLogic Group Manager CLI Reference Guide" that you can download the guide on the firmware download page (support.equallogic.com)/
-joe
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
February 13th, 2013 07:00
Also, are all the members in the group at 6.0.x firmware? Disallow downgrades will also need to be set. This is normally done automatically when you upgrade to 6.0.x firmware.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
February 13th, 2013 07:00
Also, are all the members in the group at 6.0.x firmware? Disallow downgrades will also need to be set. This is normally done automatically when you upgrade to 6.0.x firmware.