This post is more than 5 years old
5 Posts
0
9911
E7440 upgrade from non-touch to touch screen
Hello Everybody,
I have a Latitude E7440 non touch screen version that needs a complete new display assembly due damage. I was wondering if it is possible to fit a complete touch screen assembly as a replacement? I noticed that the back shell of the touch assembly is slightly different and I guess the whole structure is heavier than the non-touch version.
Many thanks,
Viktor
ejn63
9 Legend
9 Legend
•
87.5K Posts
2
November 25th, 2017 12:00
Make sure that includes the back cover -- but that should do it.
ejn63
9 Legend
9 Legend
•
87.5K Posts
1
November 24th, 2017 19:00
It is possible - but everything north of the base/keyboard needs to be replaced -- upper structure, bezel, screen, cables, antenna wires and hinges.
viktoradorjan
5 Posts
0
November 25th, 2017 12:00
Dear ejn63,
many thanks for the kind reply. Upper structure means the touch pad? I am looking to retain everything "below" the hinges and install a complete touch assembly. instead the damaged bezel, back cover and LCD.
Thanks again!
viktoradorjan
5 Posts
0
November 25th, 2017 12:00
Thank you very much for all the help! :)
viktoradorjan
5 Posts
0
November 25th, 2017 12:00
Thanks again. I'm looking to get a structure like this. Do you think it would be enough? img2.parts-people.com/.../E7440TSa.JPG
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
November 25th, 2017 12:00
Everything from the hinges up needs to be replaced - the lower chassis is the same on both versions.