Unsolved
This post is more than 5 years old
21 Posts
0
12124
Screws won't unscrew
I am having problems with two M2.5 x 8-mm screws on the base of my D610 notebook. I am using a #1 Phillips head screw driver to unscrew these screws, but they won't come out. One screw just twirls and twirls but doesn't make any progress, the other screw appears to be stripped. Is there anything that I can do to get these two screws out?
Thanks!
ieee488
4 Operator
4 Operator
•
11.1K Posts
0
December 12th, 2010 16:00
#1 Philips is 4mm
#0 Philips is 3mm
#00 Philips is 2mm
http://www.wihatools.com/200seri/261serie.htm
I would have used the #00
I bought my #00 Philips and #0 Philips at Sears Hardware