Unsolved
This post is more than 5 years old
4 Posts
0
164373
Windows 8 drivers for Latitude XT
Where are the Windows 8 drivers for the Latitude XT? The buttons on the face won't work without drivers, and the Windows 7 drivers will not load.
- John
Unsolved
This post is more than 5 years old
4 Posts
0
164373
Where are the Windows 8 drivers for the Latitude XT? The buttons on the face won't work without drivers, and the Windows 7 drivers will not load.
- John
Top
Philip_Yip
9 Legend
9 Legend
•
16K Posts
0
September 14th, 2011 13:00
Windows 8 Final isn't released yet, doubt you are going to find any drivers for it until it is.
guruboy
12 Posts
0
September 16th, 2011 08:00
I was itching to try the Windows 8 deb build on my Latitude XT. Does the touchscreen work, at least?
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
September 16th, 2011 09:00
You'll have to try to find out. Given the way it's gone for touchscreens and newer versions of Windows, my guess would be no - certainly not at full functionality.
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
September 16th, 2011 10:00
You're kidding right? You expect Dell to release drivers for a beta operating system that is well over a year from even seeing release?
asterix2112
4 Posts
0
September 16th, 2011 10:00
Do not I mean... (now now)
asterix2112
4 Posts
0
September 16th, 2011 10:00
The touchscreen works, but the buttons (to rotate screen etc...) do now. Also the graphic driver is generic and won't do the full native resolution (and looks really bad). I installed an old graphics driver but it doesn't work. Dell has had builds of Windows 8 for months now, there is no excuse for them not to have drivers out.
asterix2112
4 Posts
0
September 16th, 2011 10:00
Do not I mean (not now)
speedstep
9 Legend
9 Legend
•
47K Posts
0
September 16th, 2011 12:00
You will have to try Windows Vista or Windows 7 drivers. Since 8 is beta there are not going to be any WIN8 drivers available on the dell site.
There is probably a "compatability mode" for Vista/7 drivers.
Also there is an F8 bypass that you will need to to to allow unsigned drivers to be installed.
guruboy
12 Posts
0
September 16th, 2011 16:00
You really can't expect drivers now, or ever, really. This is quite an old laptop at this point.
KINGDMC
1 Message
0
October 1st, 2011 11:00
Don't delete the extracted files. You may need to calibrate the n trig driver - and that file is included.
Also, from pre alpha builds, you will notice the sound goes off. Just reboot your computer and that should fix the issue. I'm running a dell xt2 with multitouch and the experience couldn't be better
DiederikvdPant
2 Posts
1
December 12th, 2012 14:00
Install the quickset drivers For vista. Go to the desktop interface. Then right click on the the quickset icon in the taskbar notification area. Chose: Enable buttons. Cheers Diederik
DiederikvdPant
2 Posts
0
December 12th, 2012 14:00
Hi John,
I Installed Windows 8 release version.
Multitouch worked right away. Although i Installed a shortcut to the callibration tool that comes with the win 8 driver on the ntrig site. Sometimes i lose calibration when flipping the screen. Finger registration becomes erratic. Running the calibration tool makes everything work normal again.
Had to fiddle with the video driver. Tried different versions. Ended up with legacy driver from amd. Running with native resolution now.
The search for the button driver was hardest. But got that working as well.
Install the dell quickset drivers For vista. Go to the desktop interface. Then right click on the the quickset icon in the taskbar notification area. Chose: Enable buttons.
Hope it works for you as it has for me.
Groetjes, Diederik