Unsolved
This post is more than 5 years old
11 Posts
0
33542
studio 1537 - 65535 hr 00 mins (100%) remaining but battery not charging
i have a real strange issue with the laptop
I'm getting the battery icon in windows7, but its not detecting the AC, just says:
65535 hr 00 mins (100%) remaining
If i remove the battery it says no battery detected
If i look in dell battery meter / battery health, its says the system cannot communicate with the battery
The battery has no power, if i unplug the AC the machine switches off instantly
The LED's on the battery don't light up
I was given the laptop, and not really sure of the history, but i cannot update bios as says you need to attach the AC adapter
I'm using an AC adapter from a different dell laptop, but it's a PA-12 which the laptop says is compatible (on sticker on bottom)
Has anyone come across this issue before? i don't want to waste money buying a new battery if it's the board that needs replacing
Is there a charging module on this laptop? or do i need to replace whole board?
Thanks
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
July 8th, 2012 14:00
Go into the BIOS setup - does the setup detect the AC adapter, or is it listed as "unknown"?
This model does have the power jack on a cable - it's not part of the system board.
m.r.davies
11 Posts
0
July 9th, 2012 11:00
Hi ejn
In the bios, next to AC Adapter it says: NONE
Even though there is an ac adapter connected
I'm not sure i understand what you mean when you say
>This model does have the power jack on a cable - it's not part of the system board.
Can you explain some more please, also what would you suggest i do next?
thanks for your help
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
July 9th, 2012 11:00
If you've tried multiple adapters, none of which are correctly identified, the battery isn't the problem - the power jack or the mainboard itself is the issue.
The first thing to try replacing is the power jack:
www.parts-people.com/index.php
m.r.davies
11 Posts
0
July 9th, 2012 11:00
...also. as well as the PA-12 Ac Adapter, i've tried the PA-3E adapter
The PA-3E comes up with an error when starting the system saying its not recognised, and that the battery wont be charged
once in windows the battery icon in the task bar is empty with a red cross against it and says 0% remaining
the battery is most likely duff, but not sure whether i need a new battery, new charger or new motherboard (or all 3)
Thanks
Mark
m.r.davies
11 Posts
0
July 15th, 2012 11:00
thanks
Would that mean the battery would not recharge if the Power jack is duff?
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
July 15th, 2012 11:00
Correct - whether it's the adapter or jack, if the adapter isn't properly identified, the battery will not charge.
spectrumcolors
1 Message
1
August 3rd, 2012 01:00
I have the exactly same problem. Some time it says fully charged and 6535 hours remaining. It is certainly no issue with motherboard. I had tried all PA3 and PA12 adopter and nothing was happened. Finally I'd replaced the battery and the problem got solved. My problem started when my adapter got burned due to high voltage fluctuation. I thought it was only the adapter which I lost but later I discovered, the batter itself got some problem with this.
m.r.davies
11 Posts
0
August 10th, 2012 03:00
Thanks
I bit the bullet and bought a new battery.
The battery is recognised, but will not charge
I've ordered a new DC Power Jack from ebay for £10 so lets see if that works!
m.r.davies
11 Posts
0
August 10th, 2012 06:00
I've now replaced the DC power jack and battery...problem remains
the message i get now is
111hr 00min (2%) remaining
I presume this is due to the fact there is a little bit of charge in the new official dell battery
What to try next????
m.r.davies
11 Posts
0
August 15th, 2012 10:00
I've now replaced the motherboard with a second hand 1535 one from ebay
It works now, and the connector that the power button slots into on the motherboard looks a bit fried (on old motherboard)
So my advice to anyone else is to look at this white connector and look for signs of frying
If it looks clean and in factory condition, then it will most likely be the power switch cable
annoying, the 1535 board wont take my 2.4 cpu, so i'm stuck with a lower powered computer as the board came with a 2.0 chip
but I do have a working computer again
Hope this article serves someone else looking for it on google