Unsolved
This post is more than 5 years old
309 Posts
0
1165
Driver fault 0X9E on Win2K8R2
Hello,
I have a few IBM servers running Win2k8R2 with Emulex cards using driver 4.21003. I get a driver fault 0X9E. These servers have different HBAs with different firmware. Hardware different but operating system and Emulex driver the same. Has anyone seen this problem?
Thanks.
Mich
86 Posts
0
September 14th, 2011 23:00
Check the driver against the recommended one here for your HBA.
http://www.emulex.com/downloads/emc.html
Regards, Michel.
DanPJ
309 Posts
0
September 15th, 2011 05:00
I did. Recommended is 2.41.003 which we are running.
Thanks.
Mich
86 Posts
0
September 15th, 2011 18:00
I think it may be best to open a case with EMC Support. We can engage Emulex support if necessary.
DanPJ
309 Posts
0
September 16th, 2011 07:00
I already talked to Emulex support, they don't have a solution. They said to have Microsoft analyze the memory dump. So I guess I will put this on hold until I hear back from Microsoft.
Thanks.