Unsolved
This post is more than 5 years old
18 Posts
0
584
TimeFinder and GNS
Hi.
We're running TimeFinder 5.4.0 at the moment and as far as I can see it doesn't support GNS-defined groups. Is this true? If so, when does TF start supporting GNS-groups? If not, how do I specify such a group in, say, a SPLIT? The V5.4 Product Guide doesn't seem to mention GNS-support at all.
On a more general level: Which products do support GNS-defined groups?
Willem Vermeer
ING Bank
the Netherlands
We're running TimeFinder 5.4.0 at the moment and as far as I can see it doesn't support GNS-defined groups. Is this true? If so, when does TF start supporting GNS-groups? If not, how do I specify such a group in, say, a SPLIT? The V5.4 Product Guide doesn't seem to mention GNS-support at all.
On a more general level: Which products do support GNS-defined groups?
Willem Vermeer
ING Bank
the Netherlands
GlenH
141 Posts
0
June 28th, 2007 22:00
I'm pretty sure you need v 5.6 for GNS support on the Mainframe. GNS was released in v5.4 for open systems only from what i understand.
Regards,
Glen.
WillemV1
18 Posts
0
May 3rd, 2010 04:00
This issue isn't relevant anymore, because we've gone over to another supplier for our mainframe-storage since then.