Power off system. Remove all peripherals, AC adapter, close lid, turn over system and slide the battery-release latch to the unlocked position. You hear a click sound when the battery is unlocked. Lift the battery at an angle and remove it from the battery bay. Press " Power On" button for 15 seconds to release Static Flea Power. Replace battery, adapter, power on system. Hopefully battery start charging to 100%
moolin
3 Posts
0
February 4th, 2018 02:00
hi, I have the similar problem with you, but mine won't charge past 70%. I tried to change some power settings in control panel, but not work.
LSUFAN51
4 Operator
4 Operator
•
6.4K Posts
0
February 4th, 2018 15:00
Hi Mahesh
Power off system. Remove all peripherals, AC adapter, close lid, turn over system and slide the battery-release latch to the unlocked position. You hear a click sound when the battery is unlocked. Lift the battery at an angle and remove it from the battery bay. Press " Power On" button for 15 seconds to release Static Flea Power. Replace battery, adapter, power on system. Hopefully battery start charging to 100%
LSUFAN51
4 Operator
4 Operator
•
6.4K Posts
0
February 4th, 2018 15:00
Hi Moolin
Please uninstall / reinstall (Microsoft) ACPI Compliant Control Method Battery in device manager by following the steps in link below:
System battery shows "plugged in not charging" when you ...