How to disable hardware remapping in BIOS?/issues enabling intel optane

Question

I am trying to ensure hardware remapping is disabled in the bios for a dell g7 7590; I have the H10 1TB SSD/Intel Optane 32GB m2 module and I cannot enable intel optane.  Specific error I get when trying to enable optane is error code: 0xA0010055.  Raid mode is on in the bios.

scar120904 · Accepted Answer

Solved it myself; the H10 module requires approx 20 mb of unallocated space at the end of the SSD portion of the drive.  Advice to anyone considering the H10 in the future, don't.  The SSD runs on PCIe x2 and the optane runs on PCIe x2.  You'd be better off getting a pure SSD that can use PCIe x4.  This module's speed is limited to 2000 MB/s and the boot time is 3 seconds slower than my previous pc which used a SATA SSD (that PC was bought in 2014-2015/this one was bought 2019).

DELL-Cares · Answer

Thank you for sharing the solution on the thread. We shall archive the case at our end. Do write back to us in case of any additional queries. ^MP

Inspiron

How to disable hardware remapping in BIOS?/issues enabling intel optane