This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
717
Isilon 7.1.1.1 - after the upgrade to this version we get the following message "a device attach to the system is not functioning"
Hello,
we have perform the upgrade to version 7.1.1.1 and applied the following SMB roll-up patch (138747).
Prior to the upgrade we didn't have any problem to access the shares, but after the upgrade we receive the following message :
"a device attach to the system is not functioning".
any idea or suggestions?
Thanks
Daniel
chughh
122 Posts
0
April 29th, 2015 10:00
Hello,
I would recommend to open up case with support it might be a hardware issue. Also you need to check drive firmware patch installed.
Thanks