Unsolved
3 Apprentice
•
1.3K Posts
0
4051
PowerScale iDRAC Access
Hi
PowerScale is PowerEdge base chaccis.
PowerScale is PowerEdge base chaccis.
iDRAC cannot be authenticated and I cannot find the user name and password.
How do I access the WebGUI with iDRAC?
DellEMCSupport
Moderator
Moderator
•
631 Posts
0
August 11th, 2020 08:00
Hello,
What you might look at doing is rebooting the chassis and logging into the F2 BIOS. There should be an iDRAC settings menu. You should find an option to reset the iDRAC to it's default settings. The defaut username and password are root and calvin, per the documentation for the F200 and F600.
I also noticed in the manual a warning that the iDRAC features and functionality may not work as intended inside OneFS. I found this on page 12 of the manual.
Let me know if this helps, or if you have further questions.
mawatarai
3 Apprentice
3 Apprentice
•
1.3K Posts
0
August 16th, 2020 19:00
Thank you very much reply.
Which Manual?
Dell-DylanJ
4 Operator
4 Operator
•
2.9K Posts
0
August 17th, 2020 09:00
The Node Installation Manual.
https://dell.to/3g5mTgr
IDD_PS_cb
1 Message
0
July 13th, 2021 05:00
The PowerScale Node Installation Guide is available at Dell Online Support.
The note referenced in the previous reply, reads:
NOTE: Although iDRAC is preinstalled in F900, F600, and F200 nodes, caution is recommended when using iDRAC. Some
iDRAC features and functionality are accessible with the iDRAC interface, but are not supported. OneFS only supports the
following IPMI commands with the iDRAC interface:
● Shutdown (power off)
● Reboot (power cycle)
● Startup (power on)
● Power Status (read-only)
Phil.Lam
3 Apprentice
3 Apprentice
•
592 Posts
0
July 13th, 2021 10:00
@mawatarai
I have seen the iDRAC password is in the back of the node on a sticker.
https://qrl.dell.com/Files/en-us/html/Manuals/R640/Locating%20your%20system%20Service%20Tag=GUID-E640B915-460E-47DA-ABAE-D85966894CAC=2=en-us=.html