Unsolved
This post is more than 5 years old
2 Posts
1
24000
Inspiron N4010 ram memory specs
I need to upgrade the RAM of my N4010,now I have only one slot working (the other is not working) with 2gb samsung memory.
My questions are?
Does N4010 support any 8gb module? If it does, which type of DDR3 module? (I have tried Kingston kvr16ls11/8 but did not work)
If it supports up to 4gb which type of memory does it need? (I have tried Kingston Kvr13s9s8/4 but it did not work either)
Thanks in advance for your help
DELL-Jesse L
Moderator
Moderator
•
17K Posts
0
July 6th, 2016 06:00
Kunam,
Below is the memory information and specs for the Inspiron N4010.
Memory
The Inspiron™ N4010 system supports dual-channel DDR3 SDRAM with memory speeds of 1333 MHz. At 1333 MHz, this memory offers a significant increase of memory performance over previous platforms.
Memory Configuration
Inspiron™ N4010 has two user-accessible SODIMM sockets, both slots can be accessed after removing the base cover. Basically, when both DIMM connectors are populated, the system has optimum dual-channel performance unless channels A and B have different amounts of memory.
kunam
2 Posts
0
July 6th, 2016 13:00
Thanks Jesse!
Now it is clear that 8gb modules are not supported and that the frequency must be 1333Mhz. But I have tried 4gb modules with the same frequency (1333mhz) with no success, the specific model was this one (http://goo.gl/pLLzm3). Any idea? Are there any other specifications? Number of pins? Buffer? Cicle time?
DELL-Jesse L
Moderator
Moderator
•
17K Posts
0
July 8th, 2016 06:00
KUNAM,
There are no other specs for the systems memory. Take a look on the site below. This is where i personally get my memory.
Crucial.com
PramodKoli
1 Message
0
July 10th, 2016 02:00
I think even 1133mhz also supports. Please check it once. I am using n4010 which had come with 4gb ram ( 2*2 10600S with 1133Mhz)