Unsolved
This post is more than 5 years old
12 Posts
0
25987
Latitude D830 processor speed
My current Latitude D830, Intell core 2 duo T7250 processor, 2.0GHZ only show running at 1.2 in bios. Installed CPU Z and it shows my cpu running at
598MHZ......it is running speed step but I have no option in the bios to turn this off.........why can't I get the full 2.0GHZ speed?
Thank you
Dell - Harish M
1.3K Posts
0
April 29th, 2013 10:00
Hi fgibson1911,
Press F2 on boot up to enter BIOS and Load Bios defaults. Also ensure that the “Multicore Support” and “Speed step Enable” options under “performance” are enabled. After performing these steps let me know if there is any improvement.
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
April 29th, 2013 10:00
While you're in BIOS setup, verify that the AC adapter is correctly identified - if it's listed as "unknown", the system won't run at full speed.
fgibson1911
12 Posts
0
April 29th, 2013 13:00
Never would have considered that. I will order a "dell" adapter and see what happens.
Thanks
fgibson1911
12 Posts
0
April 29th, 2013 14:00
Do I "need" a 90W like my the warning my bios tells me for "best performance" or will a normal 65W serve the same purpose...ie allow my processor to run at 2.0ghz as it is rated?
fgibson1911
12 Posts
0
April 29th, 2013 14:00
Multicore Support and Speed step are both enabled. Also I reloaded all defaults. The only thing that changed is a notification that my AC adapter is "unknown".
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
April 29th, 2013 16:00
You need a 90W adapter. A 65W adapter will cause the system to slow down.