Unsolved
This post is more than 5 years old
4 Posts
0
13133
Latitude E6410 does not work with Dell Monitor 2709w
My 2709w intermittantly blacks out the screen for a second and come back on with a small DVI symbol in the upper left corner of the screen.
I used to run this monitor with a Latitude D630 and it was great now I changed to a Latitude E6410 running Windows 7 with a e-series docking station and have these problems. It looks as if the monitor does not get a robust signal from the new Latitude E6410.
Is there anything I can do?
ieee488
4 Operator
4 Operator
•
11.1K Posts
0
September 25th, 2010 15:00
Is it set up for auto detect or do you have it set to DVI?
ieee488
4 Operator
4 Operator
•
11.1K Posts
0
September 25th, 2010 16:00
what happens if you run straight from the laptop bypassing the docking station?
Schwimmbeck
4 Posts
0
September 25th, 2010 16:00
Thanks for responding.
The monitor is set for DVI, as it always was when I used it with the D630.
Schwimmbeck
4 Posts
0
September 25th, 2010 17:00
The E6410 does not have a DVI Port, neither did the D630.
hypercane
1 Message
0
January 20th, 2011 18:00
check that the DVI connector is firmly connected to the monitor and docking station - use the screws on the connectors. I had same problem today and that fixed it.