Unsolved
This post is more than 5 years old
5 Posts
0
65923
Studio 1537 and eSATA interface
I am having problems getting the eSATA interface on my Laptop working on an external Tsunami enclosure with eSATA interface. First off, the BIOS options indicate "eSATA [none]". Not sure if this is normal.
Dave576
170 Posts
0
September 17th, 2011 21:00
Do the procedure in the tutorial first, then install the Intel driver.
1) Follow the procedure explained in the tutorial
If the system is booting and running correctly then start step 2.
2) Install the driver package from the intel site
Let me know if you have any questions.
D.pacchi
6 Posts
0
September 18th, 2011 04:00
thank you, everything worked out fine!!
I did the procedure in the tutorial, then i installed rapid storage Technology drivers. i can boot now in AHCI and my Esata is hot plug.
thank you again
Dave576
170 Posts
0
September 18th, 2011 09:00
You are welcome, glad it worked for you.
Hot Swapping is the best way to run external HDDs.