Unsolved
This post is more than 5 years old
1 Message
0
28793
Studio 1735 - how to use 8 in 1 memory card reader
I'm trying to read a memory stick pro with the card reader and can't figure out how to put the memory stick into the reader. Please help
Unsolved
This post is more than 5 years old
1 Message
0
28793
I'm trying to read a memory stick pro with the card reader and can't figure out how to put the memory stick into the reader. Please help
Top
TheRealFireblad
4.6K Posts
0
April 5th, 2009 13:00
Welcome to the forums :emotion-21:
There are only so many ways memory cards can be inserted (4 to be exact), so it shouldn't be difficult/take long to figure out which is the right way?
Insert the end with the brass contacts on it - with the brass contacts at the bottom?
Make sure you push it in far enough too. I haven't used mine, but it will probably 'click' when it's been inserted fully/properly?
cafeja7
3 Posts
0
July 21st, 2009 11:00
You don't have a clue what you are taking about
there is no way to insert that card and don't fish it latter, of course you probably know that you are a dell guy
pna46
2 Posts
0
March 20th, 2011 14:00
Same problem with my Vostro 8 in 1 card reader. The SD card can be pushed in and it clicks into place. The Memory Stick just gets lost in the slot. After removing it twice with a tweezers I am paranoid about trying other position. Don't wish to ruin my reader or my card. Someone must know how to do this.