Ungelöst
Dieser Beitrag ist älter als 5 Jahre
8 Nachrichten
0
3662
DELL e6440 HD+ durch FHD Display ersetzen
Hallo zusammen,
ich bin am überlegen, ob ich bei meinem e6440 das 14 Zoll 1600 x 900 Pixel-Display durch ein FHD-Display ersetze. Wie ist die genaue Modellbezeichung bzw. wie kann ich feststellen ob ein Display kompatibel ist. Displays, die in Notebooks anderer Hersteller Verwendung finden, sind häufig ebenfalls kompatibel. Wie schaut es beim e6440 aus?
Vielen Dank für die Hilfe bereits im Vorhinein!
Reddeer2000
40 Nachrichten
0
November 27th, 2015 10:00
Hallo,
scheint wohl einige zu geben :
http://www.laptopscreen.com/English/model/Dell/LATITUDE~E6440/?set_currency=EUR
VG
Reddeer2000
Reddeer2000
40 Nachrichten
0
November 28th, 2015 02:00
Hi,
hab was dazu gefunden :
*IMPORTANT! Please, make sure you have the same screen resolution, or replacement will not work. HD screen (1366x768) uses one channel video cable, while HD+ (1600x900) and Full HD (1920x1080) use 2-channels video cable, thus they are not compatible. You can upgrade screen resolution by switching video cable to Full HD only! Please, refer to manufacture to find compatible video cables for HD+ and FullHD resolutions.
Muß mich korrigieren, die Umrüstung ist leider nicht möglich, da HD+ und FHD unterschiedliche Anschlüße haben ( Auszug aus einem englischsprachigen Forum ) :
System mod: LCD upgrade
Update Feb-2015: newer E6440 has eDP rather than LVDS connected on the systemboard, with a 1920x1080 LCD option. See details. The FHD LCD retrofit parts required for the 1st E6440 series are in the spoiler:
Spoiler
N23JF - discrete motherboard with EDP
THRH4 - EDP cable
K8X8M - lcd back cover EDP (was only comparing both back covers for a minute and did not see difference)
M1WHV - FHD lcd AUO AHVA
Funny thing there's no camera connector on motherboard with EDP.
NOTE: The Intel iGPU Control panel mistakenly lists the LCD as being eDP as explained in the series-1 E6440.
768P->900P is possible as a user upgrade. Required is swapping the HD 1ch LVDS cable for the 2ch LVDS HD+ and of course changing the 768P LCD for a 900P one. The two different LVDS cables available for a E6440 are:
W5JMV - ASSY CBL LVDS HD E6440
The two different LCDs being:
93V4H LIQUID CRYSTAL DISPLAY, 14.0HDF, WLED, FLAT, AG, SECONDARY
My system came from the factory with a 900P AUO B140RTN02.2 panel with Dell p/n 0M4RTT. I find brightness and viewing angles quite satisfactory. A photo of my 900PLCD's model labelling is in the spoiler below.
Spoiler
1080P or higher resolution : not possible since the E6440 uses a LVDS rather than eDP internal LCD interface. The max resolution available in 14" LVDS is usually 1600x900, representing 37% more viewing area than 1366x768. Though ebay has 14" 1680x945 LVDS LCDs, giving an additional 10% more viewing area over 1600x900 or 51% over 1366x768. --> 1680x945 LCD does not fit correctly as attempted here.
VG Reddeer2000
maurice_89
8 Nachrichten
0
November 28th, 2015 02:00
Vielen Dank für die schnelle und hilfreiche Antwort. Leider ist das passende Modell gerade nicht verfügbar. Gibt es noch vergleichbare Seiten auf denen ich mein Glück versuchen kann?
"Make sure new screen has same size,resolution, backlight as your old one". Wie kann ich diesen Hinweis verstehen? es sollte doch möglich sein, ein Display mit einer anderen Auflösung zu verbauen oder liege ich da falsch?
Danke!
Reddeer2000
40 Nachrichten
0
November 28th, 2015 03:00
Ja, dieses optionale FHD-display hat einen anderen Anschluß. Um dieses verbauen zu können , müßtest Du folgende Teile umbauen :
Parts:
N23JF - discrete motherboard with EDP
THRH4 - EDP cable
K8X8M - lcd back cover EDP (was only comparing both back covers for a minute and did not see difference)
M1WHV - FHD lcd AUO AHVA
Kostenpunkt so um die EUR 250.-, wenn Du es selber machst.
VG Reddeer2000
maurice_89
8 Nachrichten
0
November 28th, 2015 03:00
Vielen Dank für die Antwort. So kann ich mir eine Menge Arbeit sparen. Ich habe jedoch in anderen Foren gelesen, dass es mittlerweile durchaus möglich sei ein FHD-Display zu verbauen. Dell liefert den e6440 ebenfalls optional mit einem FHD-Display. Heißt das, dass in diesen Modellen dann ein anderer Anschluss verbaut ist oder gibt es mittlerweile eine andere Lösung?
Reddeer2000
40 Nachrichten
0
November 28th, 2015 04:00
Hätte Dir gerne mitgeteilt, dass das Display plug and play ist, ist es aber leider nicht.
VG Reddeer2000
maurice_89
8 Nachrichten
0
November 28th, 2015 04:00
Ok, dann hat sich das wohl erledigt :) Vielen Dank für die Infos!