This post is more than 5 years old
18 Posts
0
15818
E2314H, Cannot use older E monitor stands
Hi,
I nthe past i have bought lots of E-Flat for different TFT's E series (E2212,E2213,E1912,E1913...) without problem. Now i have bought a new tft E2314H and surprise! VESA dock in TFT have changed (it has now 3 tabs in instead of 4) and E-Flat is incompatible (has classical 4 tab dock). Someone knows if is there a new E-Flat model for Exx14 generation tft's?
Thank you!
DELL-Chris M
Community Manager
Community Manager
•
54.3K Posts
0
February 4th, 2015 11:00
Go here. Now open each monitor model User's Guide and look at the pictures of the stand and how it connects to the monitor. Based on that, you should be able to answer that question.
DELL-Chris M
Community Manager
Community Manager
•
54.3K Posts
0
February 4th, 2015 08:00
I have no idea what you are asking? What is wrong with the stand that shipped with the E2314H?
JoRdIuS
18 Posts
0
February 4th, 2015 08:00
Hi Chris,
the dock system between E series tft and E-Flat is based in a 4 tabs mechanism (e-flat have 4 tabs and TFT have 4 holes where tabs are inserted to lock).
Now Exx14 tft's series have only 3 holes and doesnt coincide with E-Flat lock tabs location, is imposible ensamble E-Flat to TFT. I attach a picture where you can see this.
Thank you!
1 Attachment
attach.jpg
JoRdIuS
18 Posts
0
February 4th, 2015 11:00
Hi Chris,
I thought that E-Flat was compatible with all E series TFT. This stand works fine per example with E2313H & E2311H (we have lot of them with E-Flat). The dock mechanism has changed in E2314H model.
So is there any way to know what E-series14 tft's are compatible with E-Flat?
Thank you!
DELL-Chris M
Community Manager
Community Manager
•
54.3K Posts
0
February 4th, 2015 11:00
The E2314H was never designed to use other monitor model stands. It was designed to use its stand on the bottom of the monitor. Or to use the VESA 100mm mounting holes to mount it.