Unsolved
This post is more than 5 years old
1 Message
0
2373
HP ZBook Studio G4, Dual U2414H, Daisy chain issue
Dear all,
Since 2 months I am a proud owner of 2 Dell U2414H monitors, but unfortunately today the monitors suddenly stopped working. I am using these monitors together with my HP Zbook studio G4 (Nvidia quadro 1200M), connecting the laptop with the first display using a USB-c to display port cable and a display port cable between the monitors (both daisy link 1.2 enabled). It all worked perfectly, until today. When I plugin the display port cable in my USB-c slot, both screens turn into "Power safe mode". While my laptop does recognize the 2 monitors, it doesn't do anything with it. Weird thing is, when I turn off the second display, the other display works fine.
I would be really grateful if anyone could help me with this problem.
Thanking you in advance.
DELL-Chris M
Community Manager
Community Manager
•
54.9K Posts
0
November 2nd, 2017 15:00
We only tested the U2414H daisy chain from either a DP (DisplayPort) out or Mini-DP out on the computer. In theory, this is how it should be setup =
HP Zbook Studio G4 Thunderbolt 3/USB-C out --> Thunderbolt 3/USB-C to DP cable --> #1 U2414H DP in port (DisplayPort 1.2 Enable)
#1 U2414H DP out port --> U2414H DP to mDP cable --> #2 U2414H mDP in port (DisplayPort 1.2 Disable)
* Turn all three off (Laptop, both monitors)
* Disconnect ALL cables from the monitor. Disconnect the Thunderbolt 3/USB-C to DP cable from the laptop
* Press each monitor power button in for 30 seconds
* Reconnect in the way I showed above. Turn both monitors on, then the laptop. Make sure #1 U2414H is DisplayPort 1.2 Enable and #2 U2414H is DisplayPort 1.2 Disable
What happens?